Rolling Tray Carbide Create File
$4.99
This is a Carbide Create file with toolpaths for a shapeolo 3 xxl. We use this file to make rolling trays with a vee carved pot leaf carved in. can be filled with epoxy and finished how ever you would like
tray size is
8.5 inches by 5.5 inches
material size is 10 inches by 6.5 inches and .75 inches thick
cutters used
1/4 inch endmill
90 degree vee bit
contains a zip file with .c2d file
tray size is
8.5 inches by 5.5 inches
material size is 10 inches by 6.5 inches and .75 inches thick
cutters used
1/4 inch endmill
90 degree vee bit
contains a zip file with .c2d file
This is a Carbide Create file with toolpaths for a shapeolo 3 xxl. We use this file to make rolling trays with a vee carved pot leaf carved in. can be filled with epoxy and finished how ever you would like
tray size is
8.5 inches by 5.5 inches
material size is 10 inches by 6.5 inches and .75 inches thick
cutters used
1/4 inch endmill
90 degree vee bit
contains a zip file with .c2d file
tray size is
8.5 inches by 5.5 inches
material size is 10 inches by 6.5 inches and .75 inches thick
cutters used
1/4 inch endmill
90 degree vee bit
contains a zip file with .c2d file
This is a Carbide Create file with toolpaths for a shapeolo 3 xxl. We use this file to make rolling trays with a vee carved pot leaf carved in. can be filled with epoxy and finished how ever you would like
tray size is
8.5 inches by 5.5 inches
material size is 10 inches by 6.5 inches and .75 inches thick
cutters used
1/4 inch endmill
90 degree vee bit
contains a zip file with .c2d file
tray size is
8.5 inches by 5.5 inches
material size is 10 inches by 6.5 inches and .75 inches thick
cutters used
1/4 inch endmill
90 degree vee bit
contains a zip file with .c2d file
